CommScope ATC300-2000 - Manual (Page 41)

Section 3–Changing IP Settings on the Local PC Using the IP Config Tool ATC300-1000/2000 Teletilt ® RET System
3-8 August 2014 Bulletin 639544 • Revision L
Figure 3-8. Closing/Restoring Original IP Settings For The Local Computer.
3.6 Restoring Original IP Settings on the Local Computer
When access to the controller is no longer needed, the IP Config Tool can be closed to restore the
local computer to its original IP settings (Figure 3-8).
2. Original IP settings are restored to local
computer.
1. Click on Close.