CommScope ATC300-2000 - Manual (Page 30)

Section 2
Installation Instructions and Safety Precautions
2.0 Section Overview
This section covers installation procedures for mounting and grounding the ATC300-1000/2000 con-
troller chassis, as well as safety precautions.
2.1 Abbreviations
AWG American Wire Gauge
2.2 Installation Preparations
Warnings:
• This equipment should only be installed by trained personnel.
• Do not connect or disconnect cables during lightning activity.
Preparation:
• Remove the ATC300-1000/2000 controller from the packaging container (also see ESD precau-
tions in the introduction of this document).
• Verify availability of power, either –48 V battery or +24 V power supply.
Tools and Parts:
• 14–AWG multi-strand copper wire for power connection, using color coding as specified at the
installation site.
• 10–AWG multi-strand copper wire, using appropriate color coding as specified at the installation
site.
• Ring-torque terminal for a 1/4” stud.
• Crimping tool for ring-torque terminal.
• Four mounting screws to mount the controller chassis onto the rack.
• 6” adjustable wrench.
• 1/8” flat-blade screwdriver.
• Wire stripper.
Bulletin 639544 • Revision L August 2014 2-1