CommScope ATC300-2000 - Manual (Page 209)

Bulletin 639544 • Revision L August 2014 D-1
D.0 Relay Alarm Definitions Table
Major alarms that may be reported by a device are detailed in Table 1, next page.
D.1 Relay Alarm Information
1. A major alarm relay can also be sent by the controller for the following conditions:
• AISG_NO_REPLY Communication loss with one or more devices
• POWER_STATUS Out of range current or voltage detected
• INITIALIZATION_STATUS Occurs during controller startup
2. The controller may also send minor alarm relays for the following condition:
• DOWNLOAD_STATUS This condition is not an error. It indicates that the controller
firmware is being downloaded.
Appendix D
ATC300-1000/2000 Relay Alarms