CommScope ATC300-2000 - Manual (Page 170)

Bulletin 639544 • Revision L August 2014 21-1
Section 21
Adjusting the Fan on a Single SmartBeam ®
Antenna
21.0 Section Overview
• The beamwidth may be adjusted on a fan axis of a SmartBeam antenna that is addressed, config-
ured, and whose current state does not prevent antenna movement.
• Movement may be prevented when a device is not responding to commands from the controller, is
in the middle of a move or configuration change, or is experiencing a mechanical malfunction.
21.1 Adjusting the Fan on a Single SmartBeam Antenna
1. From the controller’s main interface screen, select the device ending in a “.f” (for “fan”) to be moved
(Figure 21-1).
2. Click on Move Selected (Figure 21-1).
Figure 21-1. Selecting Device To Be Adjusted.
1. Click on the device
that is to be adjusted.
2. Click on Move Selected.