CommScope ATC300-2000 - Manual (Page 20)

Section 1–System Description ATC300-1000/2000 Teletilt ® RET System
1-4 August 2014 Bulletin 639544 • Revision L
Port Details:
Figures 1-3 through 1-7 show examples of the ATC300-1000/2000 port connections.
Figure 1-3. ATC300-1000/2000 Ethernet Port.
The ATC300-1000/2000 controller provides one 10/100 Ethernet port with auto negotiation capabilities.
The Ethernet port (Figure 1-3) is used for connecting to a gateway or a PC.
Figure 1-4. ATC300-1000/2000 Serial Port.
The ATC300-1000/2000 controller is also equipped with an RS–232 serial port (LMT) with the following
default settings: 115200 Baud, 8 data bits, 1 stop bit, no parity, and no flow control. The RS–232 port
(Figure 1-4) is configured as a DCE interface. This port is used to connect to a serial port on a PC.