CommScope ATC300-2000 - Manual (Page 202)

ATC300-1000/2000 Teletilt ® RET System Appendix C–Uploading Firmware Manually
Bulletin 639544 • Revision L August 2014 C-5
(ATC200 and ATC300 2.32 and earlier) In the Firmware URL window, type in the IP address IP ad-
dress for the PC that is running the FTP Server (and holds the software files), followed by a forward
slash and the name of the file that is to be uploaded. Leave the User Name and Password blank.
The text typed into the Firmware URL edit box should look similar to the example shown in Figure
C-4.
In Figure C-4, the IP address is 192.168.255.140 and the file to be uploaded is atc300_2.10.tar.
The firmware (software) URL address was entered as:
192.168.255.140/atc300_2.10.tar
Figure C-3 Software Configuration (ATC300 2.34 and later)