CommScope ATC300-2000 - Manual (Page 114)

Section 11–Device Discovery and Addressing ATC300-1000/2000 Teletilt ® RET System
11-2 August 2014 Bulletin 639544 • Revision L
2. Click on Start Scan to activate the device search (Figure 11-2). Note that the controller can identify
up to 32 AISG devices.
• (ATC300 only) Device scan will allow up to 64 AISG devices in the database when the controller
is configured as Bus is externally powered (See figure 7-3). Otherwise, the limit stays at 32.
3. After the device search is complete, click on Close to return to the controller’s main interface
screen (Figure 11-3).
Figure 11-2. Starting Scan For New Devices.
Figure 11-3. Closing Device Search Results Screen.
After the scan is complete,
click on Close.
Click on Start Scan.
Device scan is more efficient if
operator selects the number of
devices expected to be found.
Leave at 32 if unknown.