CommScope ATC300-2000 - Manual (Page 108)

ATC300-1000/2000 Teletilt ® RET System Section 10–Uploading Device Firmware
Bulletin 639544 • Revision L August 2014 10-7
Figure 10-10. Selecting Help to Access the About Web Page.
10.4 Using the Controller Help Menu
The Help menu on the menu bar on the main interface screen has two selections, About and Software
Versions (Figure 10-10). Selecting either opens the relevant web page.
1. Help
→About…
The operator will find important information about the ATC300 controller, including its serial number,
revision, and current status (Figure 10-11).
Note: The Modem Ports field is supported only by the ATC300-2000. The ATC300-1000 will in-
dicate this information is “N/A”. This is an easy way to differentiate between ATC300 hardware
models.
2. Help
→Software Versions
The operator will find the versions of the Andrew device firmware and the Andrew Antenna Defini-
tion File resident on the ATC300 controller (Figure 10-12).
• Usage of Resident Device Firmware
When an Andrew device is found in a scan, the controller determines whether that device type
has resident device firmware available, and if that resident device firmware is newer than the
version on the device. If so, the controller advises the operator that the device may be auto-
upgraded. See Section 10.2 for more information on auto-upgrading Andrew devices.
Select Help to access the About and
Software Versions web pages.