CommScope ATC300-2000 - Manual (Page 49)

Section 4–Changing IP Settings on the Local Computer Manually ATC300-1000/2000 Teletilt ® RET System
4-6 August 2014 Bulletin 639544 • Revision L
4.2 Restoring Original IP Settings on the Local Computer
When access to the controller is no longer needed, the IP address and subnet mask on the local com-
puter must be restored to the original settings for it to reconnect to a company LAN (network system).
Follow the same procedures discussed in paragraph 4.1, except enter the original IP settings that
were noted before the computer was configured.
If the computer was originally set to obtain an IP address automatically, click on this option and click
on OK to restore a company network connection.