CommScope ATC300-2000 - Manual (Page 138)

Bulletin 639544 • Revision L August 2014 14-1
Section 14
Adjusting the Electrical Downtilt on a Group of
Antennas
14.0 Section Overview
In addition to changing the downtilt of a single antenna, changes may also be applied to a group of
antennas. The antennas that can be included in a group move must be in the same sector and have
the same electrical tilt range (same minimum and maximum tilt) and be the same device type.
14.1 Adjusting the Downtilt Angle on a Group of Antennas
1. Select a device from the controller’s main interface screen that is to be included in the sector move
(Figure 14-1).
2. Click on Move Sector (Figure 14-1).
Figure 14-1. Selecting A Device That Is To Be Included In The Sector Move.
1. Click on a device that is to be included in the sector move.
2. Click on Move Sector.