1 set aitm(s) to multiple-single ret mode – CommScope ATC300-2000 User Manual
Page 121
ATC300-1000/2000 Teletilt
®
RET System
Section 11–Device Discovery and Addressing
Bulletin 639544 • Revision L
August 2014
11-9
Figure 11-10. Andrew AITM Device in MultiRET Mode
11.6.1 Set AITM(s) to Multiple-Single RET Mode
This button is available when at least one Andrew AITM actuator in multiRET mode has been found
and is in the database. Select this option to change all AITMs that are in multiRET mode to multiple-
single RET mode. After the mode has been successfully changed, the devices will no longer be in
communication and should be deleted. Perform a new device scan to find the devices in their new
mode.
This manual is related to the following products: