CommScope ATC300-2000 - Manual (Page 83)

Section 8–Configuring the Controller to Connect Over an SNMP Manager ATC300-1000/2000 Teletilt ® RET System
8-6 August 2014 Bulletin 639544 • Revision L
only the devices assigned with that operator. These logs are deleted when the administrator selects
Set Operator Info. A warning box notifies the administrator of this action.
Figure 8-6 Operator Management Web Page
8.2.1.2 Assigning Operators to Devices
Before entering this web page, the administrator should perform an AISG bus device scan (Home
| Find Devices).
This web page provides an administrator the capability to assign operators to AISG devices that
were previously found in device scan. The page displays a list of the AISG devices, along with a
drop-down option list of the defined operators for each device. The administrator may select one
operator for each device. The same operator may be assigned to multiple devices. Devices do
not have to be assigned an operator. To unassign an operator, the blank operator name option can
be selected. (See Figure 8-7 Assigning Operators to AISG Devices).
Logged-in operators will be able to view and manage only those devices to which they have been
assigned.
If an operator name is deleted or modified from the Manage Operators web page, any devices
assigned with that operator name will become unassigned.