CommScope ATC300-2000 - Manual (Page 62)

ATC300-1000/2000 Teletilt ® RET System Section 5–Obtaining IP Settings for Controller (When IP is Unknown)
Bulletin 639544 • Revision L August 2014 5-13
5.2.4 Activating the Serial Connection
An icon was created and placed on the computer’s desktop during the final stage of using the New
Connection Wizard (Figure 5-18). If the Login screen is not already open for the serial connection,
double click on the icon for the new serial connection to open.
1. Clear the User Name and Password fields. Clear the check box next to Save this user
name . . . (Figure 5-19).
2. Click on Connect (Figure 5-19).
3. The local computer will dial-up a connection to the controller though a modem using the new
serial connection (Figure 5-20).
Figure 5-20. Dialing the Serial Connection to Connect to the Controller.
Figure 5-19. Selecting Connect from Login Screen.
Figure 5-18.
ATC200 Serial Connection Icon.
1. Clear all fields.
2. Click.