CommScope ATC300-2000 - Manual (Page 3)

ATC300-1000/2000 Teletilt ® RET System ATC300-1000/2000 Teletilt ® RET System
Bulletin 639544 • Revision L August 2014 i
Revision History
Revision No. Date Description of Changes
A December 2007 Released
B October 2008 Added instructions on how to configure the controller to
operate using an SNMP agent (Section 8).
Moved instructions on Uploading Firmware Manually to
Appendix C.
Rewrote instructions on Uploading Device Firmware,
which includes how to change AISG mode in device (Sec-
tion 10).
Added instructions on AISG Reset Capabilities and
Using AISG Control Tools to Section 11.
Added instructions on manually setting an IP address for
Windows Vista operating systems to Appendix B.
C November 2008 Added 3 sections about Multiple Integrated Actuators.
Added SmartBeam Antenna Sections to explain configu-
ration and adjustments.
Added Section 23 to explain Tower Mounted Amplifiers.
D May 2009 Section 7 introduces bus is externally powered feature.
Section 9 changes from download the antenna definition
file to antenna definition file releases are bundled with
controller firmware.
Section 10 explains the Firmware Bundle Version Num-
bering.
Added Section 10.4, Using the Controller Help Menu:
About and Software Versions.
Section 11 added 64 device database expansion.
Section 12 introduces generic antenna model naming.
Section 15 shows addition of 1-way SmartBeam ®
antennas.
E December 2009 DHCP added to Sections 6, 7, and Appendix B.
F May 2010 Update ATC300-1000 Operations Manual to also cover
ATC200-1000 Operations Manual.
G November 2010 Correct drawing.
H August 2012 Change ATC300/ATC200 Operations Manual to support
ATC300 release 2.34_A.