CommScope ATC300-2000 User Manual
Page 46
ATC300-1000/2000 Teletilt
®
RET System
Section 4–Changing IP Settings on the Local Computer Manually
Bulletin 639544 • Revision L
August 2014
4-3
4. Click
on
Internet Protocol (TCP/IP) and make sure the box next to it is checked (Figure 4-3).
5. Click
on
Properties (Figure 4-3).
Figure 4-3. Selecting Internet Protocol Properties.
1. Click on Internet Protocol (TCP/IP). Place check mark in box.
2. Click on Properties.
This manual is related to the following products: