CommScope ATC300-2000 - Manual (Page 84)

ATC300-1000/2000 Teletilt ® RET System Section 8–Configuring the Controller to Connect Over an SNMP Manager
Bulletin 639544 • Revision L August 2014 8-L
8.2.1.3 Operator Login/Logout
Operators do not need to know their usernames. An operator simply needs to enter his password
to be able to manage those devices assigned to him.
Operator capability is very limited. A logged in operator may view, configure, move, and upgrade
only his devices. He cannot perform a device scan. The Current Alarms and Alarm History web
pages are limited to only his devices as well. An operator may view the controller’s About and
Software Versions web pages.
An operator may log out by selecting the Logout menu option.
Figure 8-7 Assigning Operators to AISG Devices