CommScope ATC300-2000 - Manual (Page 40)

ATC300-1000/2000 Teletilt ® RET System Section 3–Changing IP Settings on the Local PC Using the IP Config Tool
Bulletin 639544 • Revision L August 2014 3-7
The backup file for the new IP configuration will appear in the window (Figure 3-7).
Figure 3-7. New IP Backup File Shown.
New IP backup file shown.
Leave the Andrew IP Configuration Tool running to maintain the new IP settings on the
local computer until access to the controller is no longer needed. The local computer will
also need to be connected to the controller’s Ethernet port to gain access.
See Section 6 for accessing the controller through a direct Ethernet connection using an Ethernet
cable.