CommScope ATC300-2000 - Manual (Page 53)

Section 5–Obtaining IP Settings for Controller (When IP is Unknown) ATC300-1000/2000 Teletilt ® RET System
5-4 August 2014 Bulletin 639544 • Revision L
8. On the COM1 Properties window select 115200 from the Bits per second drop down menu.
Select None from the Flow control drop down menu (Figure 5-5).
9. Click OK (Figure 5-5).
Figure 5-5. Setting The COM1 Properties.
10. Press Enter key. If dollar sign appears, you have established a connection (Figure 5-3).
Note: ATC300 version 2.32 and later require a root password for controller access. Contact
customer support to obtain this password.
Figure 5-6. Establish The ATC300-1000/2000 Connection.