CommScope ATC300-2000 - Manual (Page 106)

ATC300-1000/2000 Teletilt ® RET System Section 10–Uploading Device Firmware
Bulletin 639544 • Revision L August 2014 10-5
10.3 Choice of Upgrade Method
Select Show Statistics on the Main Interface screen (Figure 10-6) to open the Device Statistics
window. Using the Device Statistics screen (Figure 10-7), ATC300-1000/2000 operators can choose
to update device firmware in one of two ways, Auto Upgrade or Manual Upgrade.
• Section 10-2 explains the Auto Upgrade option for uploading device firmware to update
actuators.
• Manual Upgrade is another option seen on the Device Statistics screen. See Appendix C for a
description of the manual upgrade method for uploading device firmware and updating the device.
Figures 10-8 and 10-9 show the Manual Upgrade screen (differs based on controller version).
Figure 10-7. Device Statistics Shows All Updated Devices And Choice Of Upgrade Method.
All devices are updated.
Manual Upgrade Auto Upgrade
Figure 10-8. Manual Upgrade Option (ATC200 and ATC300 2.32 and earlier)