CommScope ATC300-2000 - Manual (Page 166)

Bulletin 639544 • Revision L August 2014 20-1
Section 20
Adjusting the Pan on a Single SmartBeam ®
Antenna
20.0 Section Overview
• The azimuth offset may be adjusted on a pan axis of a SmartBeam antenna that is addressed,
configured, and whose current state does not prevent antenna movement.
• Movement may be prevented when a device is not responding to commands from the controller, is
in the middle of a move or configuration change, or is experiencing a mechanical malfunction.
20.1 Adjusting the Pan on a Single Antenna
1. From the controller’s main interface screen, select the device ending in a “.p” (for “pan”) to be
moved (Figure 20-1).
2. Click on Move Selected (Figure 20-1).
Figure 20-1. Selecting Device To Be Adjusted.
1. Click on the device
that is to be adjusted.
2. Click on Move Selected.