CommScope ATC300-2000 - Manual (Page 152)

Bulletin 639544 • Revision L August 2014 17-1
Section 17
Adjusting the Electrical Downtilt on a Group
of Antennas Equipped with Multiple Integrated
Actuators
17.0 Section Overview
In addition to changing the downtilt of a single antenna, changes may also be applied to a group of
antennas. The antennas that can be included in a group move must be in the same sector and have
the same electrical tilt range (same minimum and maximum tilt).
17.1 Adjusting the Downtilt Angle on a Group of Antennas
1. Select a device from the controller’s main interface screen that is to be included in the sector move
(Figure 17-1).
2. Click on Move Sector (Figure 17-1).
Figure 17-1. Selecting A Device That Is To Be Included In The Sector Move.
1. Click on a device that is to be included in the sector move.
2. Click on Move Sector.