CommScope ATC300-2000 - Manual (Page 78)

Bulletin 639544 • Revision L August 2014 8-1
Section 8
Controller Configuration Options
8.0 Section Overview
• The ATC300/200 controller is equipped with an SNMP (Simple Network Management Protocol)
agent that allows remote access using an SNMP manager.
• Andrew provides the MIB (Management Information Base), which is supported by the ATC300/200
controller SNMP agent, upon request.
• SNMP is a well-defined protocol used in the industry to manage devices remotely.
• The ATC300/200 controller allows configuration of the unit site name.
• The ATC300 allows password protection on the web page interface.
• The ATC300 provides some special case controller configuration options.
8.1 Configuring the Controller for an SNMP Manager
The controller’s SNMP agent can be accessed through the menu option Configuration
→ SNMP
Config (Figure 8-1).
Figure 8-1. Selecting Menu Option To Access SNMP Configuration Page.
Accessing the SNMP Agent.