CommScope ATC300-2000 - Manual (Page 52)

ATC300-1000/2000 Teletilt ® RET System Section 5–Obtaining IP Settings for Controller (When IP is Unknown)
Bulletin 639544 • Revision L August 2014 5-3
4. A New Connection window will open. Enter a name for the connection and choose an icon in
the Connection Description window (Figure 5-3).
5. Click OK (Figure 5-3).
Figure 5-3. Using The New Connection Window.
6. Select COM1 from the Connect To drop down menu (Figure 5-4).
7. Click OK (Figure 5 -4).
Figure 5-4. Connect To COM1 Serial Port.