CommScope ATC300-2000 - Manual (Page 93)

ATC300-1000/2000 Teletilt ® RET System Section 9–Uploading Controller Firmware Using the IP Config Tool
Bulletin 639544 • Revision L August 2014 9-5
Figure 9-4. IP Config Tool’s FTP Server Tab Screen.
1. Click on FTP Server tab.
2. Click on Find File(s).
9.3 Locating/Adding Firmware Files to FTP Server
Note that with ATC300-1000/2000 Version 2.21_A to 2.32_A, and ATC200-1000 RET-AN-RT-
464A8_A. ascu and later, Andrew antenna definition files can not be updated manually. They
are bundled with the controller firmware. However, other vendors’ ADFs may still be loaded
on the controller using the method described in this section. ATC300-1000/2000 version
2.34_A and later allows manual update of Andrew antenna definition files.
1. Ensure the controller is connected/powered and that the IP Config Tool is launched.
2. From the IP Config Tool interface, click on the FTP Server tab (Figure 9-4).
3. Click on the Find File(s) button (Figure 9-4).