MacDon M155 Operators Manual User Manual
Page 93
Cab-Forward, Engine Running, Header Engaged, Auger Header Index Switch ON
Scroll through display with cab display module (CDM) switch or ground speed lever (GSL) switch.
Display (lower or upper line)
Description
#####.# ENGINE HRS
Total engine operating time.
#####.# HEADER HRS
Total Header operating time.
##.# ACRES/HOUR
##.# HECTARES/HOUR (If Metric)
Actual cutting rate in acres (hectares)/hour.
###.# SUB ACRES
###.# SUB HECTARES (If Metric)
Area cut since last reset. To reset, display SUB ACRES
on lower line, and hold down program switch until display
resets 5–7 seconds).
###### TOTAL ACRES
###### TOTAL HECT (If Metric)
Total area cut by machine.
##.## ##.# REEL IND.
##.## REEL SENSOR
Reel Peripheral speed along with ground speed in mph or
kph.
Sensor disabled. IND and SENSOR alternate at 1 second
intervals.
##.# AUGER SPEED
##.# AUGER SENSOR
Auger rotational speed (4.7–9.9).
Sensor disabled. SPEED and SENSOR alternate at
1 second intervals.
#### KNIFE SPEED
#### KNIFE SENSOR
Knife speed In strokes per minute.
Sensor disabled. SPEED and SENSOR alternate at
1 second intervals.
##.# HEADER HEIGHT
##.# HEADER SENSOR
Distance setting (00.0–10.0) between cutterbar and ground.
Sensor disabled. HEIGHT and SENSOR alternate at
1 second intervals.
##.# HEADER ANGLE
##.# TILT SENSOR
Angle setting (00.0–10.0) header relative to ground.
Sensor disabled. ANGLE and SENSOR alternate at
1 second intervals.
##.# L FLOAT R ##.#
FLOAT SENS DISABLED (If Sensor Disabled)
Left and right float setting (0.0–10.0).
Sensor disabled.
LOAD|■■■■| | ####
Bar graph representing hydraulic operating pressure. Full
scale Is preprogrammed overload pressure (2500–5000
psi). If sensor disabled, LOAD does not display
6
### °C or F HYD OIL TEMP
### °C or F HYD TEMP
Hydraulic oil temperature.
Sensor Disabled. TEMP and SENSOR alternate at
1 second intervals.
6.
The LOAD sensor to monitor knife/conditioner circuit pressure is optional. To monitor reel/auger circuit pressure, relocate
sensor as per Form MD #169031, which is available through your Dealer.
169883
77
Revision A