MacDon M155 Operators Manual - Manual (Page 422)

OPTIONS AND ATTACHMENTS
7.1.6 Double Windrow Attachment (DWA)
Allows auger header windrower to lay a double windrow. The kit includes a draper deck, linkage assembly,
hydraulics, and installation instructions.
MD #C1987 consists of:
• MD #B4655 Deck
• MD #B5270 Linkage assembly
• MD #B5301 Hydraulic kit
• MD #169216 Double Windrow Attachment (DWA) Manual
7.1.7 Draper Header Reel Drive and Lift Plumbing
Base kit required to run draper header. Includes draper header reel drive and lift plumbing (less valve) and reel
fore-aft hydraulics.
NOTE: If the last digit of windrower code is B, this bundle is already installed.
MD #B5577
Includes Instruction MD #169537.
7.1.8 Engine Block Heater
Contact your nearest Cummins Engine Distributor, and provide your engine model and serial numbers to ensure
the proper heater is supplied.
7.1.9 Engine Fan Air Baffle
Prevents the windrow from being disturbed by engine cooling fan air blast.
MD #B5440
Instruction MD #169443 is included with the bundle
7.1.10 Header Drive Reverser
Allows the conditioner, knife, auger, and reel to reverse on the auger header, and the conditioner and knife to
reverse on the draper header.
MD #B4656
Instruction MD #169213 is included with the kit.
7.1.11 HID Auxiliary Lighting
Provides additional field lighting. The kit includes two cab-mounted high intensity discharge (HID) lamps and
installation instructions.
MD #B5596
Instruction MD #169621 is included with the bundle
169883
406
Revision A