MacDon M155 Operators Manual - Manual (Page 294)

MAINTENANCE AND SERVICING
2. Set spring dimension (B) to 1-1/4 in. (32 mm).
3. To increase the pivot resistance, turn the nut (A)
clockwise to compress the spring.
4. To decrease the resistance, turn the nut (A)
counterclockwise to release the spring tension.
Figure 5.30: GSL Adjustment Spring
B - Spring Dimension 1-1/4 in. (32 mm)
5.7.4 Steering Adjustments
Checking Steering Link Pivots
The following checks should be performed annually:
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Place ground speed lever (GSL) (A) in N-DETENT,
shut down engine, and remove key.
Figure 5.31: Operator Console
169883
278
Revision A