Caution – MacDon M155 Operators Manual User Manual

Page 191

Text mode
Original mode

9. Disconnect header drive hydraulics (A) and electrical

harness (B) from header and store in support on
windrower left cab-forward side. Refer to the draper
header operator’s manual for further information.

Figure 4.143: Header Drive Hydraulics

10. Disconnect reel hydraulics (A) from header and

store on bracket at windrower left cab-forward side.
Refer to the draper header operator’s manual for
further information.

Figure 4.144: Reel Hydraulics

CAUTION

Check to be sure all bystanders have cleared the area.

11. Start engine and activate HEADER TILT cylinder

switch on ground speed lever (GSL) to release load
on center-link cylinder.

Figure 4.145: GSL

A - Header Tilt Up

B - Header Tilt Down

169883

175

Revision A