Setting draper index, Operation setting draper index – MacDon M155 Operators Manual User Manual

Page 250

Setting Draper Index

Figure 4.287: Operator Console

A - Display

B - Header Index

C - Draper Fast

D - Draper Slow

E - Display Selector

Set DRAPER INDEX as follows:

IMPORTANT:

Windrower can be moving, but must be GREATER THAN minimum reel speed.

1. Engage header.

2. Set HEADER INDEX switch (B) to ON.

3. Press DISPLAY SELECTOR (E) so that DRAPER INDX is displayed at (A).

4. On cab display module (CDM) press DRAPER FAST (C) or SLOW (D) until desired index is displayed at (A).

Display shows ##.## ##.# DRAP IND.
##.## = MPH or KPH

##.# = -1.9 to +3.0

169883

234

Revision A