6operating with a d-series header, 1configuring hydraulics, Operating with a d-series header – MacDon M155 Operators Manual User Manual

Page 243: Configuring hydraulics, 6 operating with a d-series header, 1 configuring hydraulics

4.6

Operating with a D-Series Header

4.6.1

Configuring Hydraulics

The windrower must be fitted with a draper drive basic kit to operate D-Series draper headers.

Windrowers equipped with D-Series hydraulics have four
header drive hoses on the LH side.

Figure 4.277: Draper Header Drive Hydraulics

There are also up to five reel drive hoses on the RH side.

If necessary, obtain the following kits from your MacDon
Dealer and install them in accordance with the instructions
supplied with the kits.

• Base Kit MD #B5577

Figure 4.278: Draper Header Reel Hydraulics

169883

227

Revision A