MacDon M155 Operators Manual - Manual (Page 279)

MAINTENANCE AND SERVICING
Lubricants, Fluids, and System Capacities
Table 5.15 System Capacities
Lubricant/Fluid Location Description Capacity
Grease
As required unless
otherwise specified
SAE multi-purpose.High temperature
extreme pressure (EP2) performance
with 1% max molybdenum disulphide
(NLGI Grade 2) lithium base.
Diesel fuel Fuel tank
Diesel Grade No.2, or Diesel Grade No.1
and 2 mix 26 ; refer to Fuel Specifications,
page 262 for more information.
97 U.S. gallons
(378 liters)
Hydraulic oil Hydraulic reservoir
SAE 15W-40 compliant with SAE specs
for API Class CJ-4 engine oil which
meets or exceeds CES20081 and API
performance classification CJ-4.
17.2 U.S. gallons
(66 liters)
Gear box
2.2 U.S. quarts
(2.1 liters)
Gear lubricant
Wheel drive 27
SAE 75W-90, API service class
GL-5.Fully synthetic gear lubricant,
(SAE J2360 preferred).
1.5 U.S. quarts
(1.4 liters)
Antifreeze
Engine cooling
system
ASTM D-6210 and Fleetguard ES
Compleat ® . See below.
6.6 U.S. gallons
(25 liters) 28
Engine oil Engine oil pan
SAE 15W-40 compliant with SAE specs
for API Class SJ and CH-4 engine oil.
11.6 U.S. quarts
(11 liters)
Air conditioning
refrigerant
Air conditioning
system
R134A 5 lbs (2.27 kg)
Air conditioning
refrigerant oil 29
Air conditioning
system total
capacity
PAG SP-15 8.1 fl. oz. (240 cc)
26. Optional when operating temp below 0°C. (32°F).
27. SAE 85W-140 API Service Class GL-5. Extreme pressure gear lubricant is used before initial change.
28. Equal parts with water, high quality, soft, de-ionized or distilled water as recommended by Supplier.
29. New compressor (MD #203013) comes filled. If installing on 2014 and prior, see Service Bulletin 1254.
169883
263
Revision A