MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers User Manual
MacDon Gardening equipment
Table of contents
Document Outline
- toc
- Introduction
- Serial Number(s)
- 1Safety
- 2Definitions
- 3Component Identification
- 4Specifications
- 5Operation
- 6Operating the Header
- 6.1Header Float
- 6.2Roll Gap
- 6.3Roll Tension
- 6.4Roll Timing
- 6.5Forming Shields
- 6.6Header Angle
- 6.7Cutting Height
- 6.8Ground Speed
- 6.9Double Windrowing
- 6.10Tall Crop Feed Plates
- 6.11Tall Crop Dividers
- 6.12The Overshot Auger
- 6.13Stripper Bars
- 6.14Haying Tips
- 6.15Unplugging the Header
- 7Maintenance and Servicing
- 7.1Preparation for Servicing
- 7.2Torque Specifications
- 7.3Conversion Chart
- 7.4Recommended Fluids and Lubricants
- 7.5Maintenance Requirements
- 7.6Cutterbar Disc Maintenance
- 7.7Drive Systems
- 7.8Hydraulics
- 7.9Electrical
- 8Troubleshooting
- 9Options and Attachments
- Introduction
- tables
- Table 7.1 SAE Grade 5 Bolt and Grade 5 Free Spinning
- Table 7.2 SAE Grade 5 Bolt and Grade 5 Distorted Thread Nut
- Table 7.3 SAE Grade 8 Bolt and Grade 8 Distorted Thread Nut
- Table 7.4 SAE Grade 8 Bolt and Grade 8 Free SpinningNut
- Table 7.5 Metric Class 8.8 Bolts and Class 9 Free Spinning Nut
- Table 7.6 Metric Class 8.8 Bolts and Class 9 Distorted Thread Nut
- Table 7.7 Metric Class 10.9 Bolts and Class 10 Free Spinning Nut
- Table 7.8 Metric Class 10.9 Bolts and Class 10 Distorted Thread Nut
- Table 7.9 Metric Bolt Bolting into Cast Aluminum
- Table 7.10 Flare-Type Hydraulic Tube Fittings
- Table 7.11 O-Ring Boss (ORB) Hydraulic Fittings (Adjustable)
- Table 7.12 O-Ring Face Seal (ORFS) Hydraulic Fittings