MacDon M155 Operators Manual - Manual (Page 424)

OPTIONS AND ATTACHMENTS
7.1.19 Self-Aligning Center-Link
Allows the center-link cylinder to be hydraulically positioned and connected to the header without leaving the
operator’s station.
For hands-free connecting, hydraulic center-link (MD #B4650) must be installed.
Instruction MD #B4802 is included with the kit.
7.1.20 Swath Roller
An axle-mounted swath roller increases the windrow’s resistance to wind disturbance, especially in canola or
similar crops. It can be fitted with a hydraulic lift with in-cab controls.
Contact: Free Form Plastic Products
Box 159
502 F.P. Bourgault Drive
St. Brieux, SK S0K 3V0
(306) 275-2155
http:\\www.freeformplastics.com
7.1.21 Towing Harness
The towing harness is used together with the weight box when towing a D-Series draper header equipped with
slow speed transport option behind the windrower.
MD #B5280 – Weight box harness only. Includes hitch pin and wiring for use with slow speed header transport option.
Instruction MD #169278 is included with the bundle.
7.1.22 Warning Beacons
Two rotating warning beacons that are designed for installation onto the pre-wired cab. The kit includes the
beacons, a switch, mounting hardware, and instructions. The beacons are standard equipment for exported
windrowers, and are optional for North America. Fits 2009 and newer machines.
MD #B5582
Instruction MD #169538 is included with the bundle.
169883
408
Revision A