beautypg.com

Replacing headlight bulb, Maintenance and servicing – MacDon M155 Operators Manual User Manual

Page 353

background image

MAINTENANCE AND SERVICING

Figure 5.143: Headlight Beam Positioning

A - 49.75 in. (1263 mm) Maximum B - 25 ft (7.5 m)
C - Top Edge of Beam

D - Beam Centered on Direction

E - Ground

of Travel Line

Replacing Headlight Bulb

1. Remove two screws (A) and remove headlight

assembly from hood.

Figure 5.144: Headlights

2. Pull wiring harness connector off the headlight

assembly and remove rubber insulator boot (A).

Figure 5.145: Headlight Assembly

169883

337

Revision A