MacDon M155 Operators Manual - Manual (Page 312)

MAINTENANCE AND SERVICING
3. Remove filler cap (A) by turning it counterclockwise.
4. Carefully pour the oil. A funnel is recommended to
avoid spillage. Refer to Lubricants, Fluids, and System
Capacities, page 263 for oil specifications.
CAUTION
Do NOT fill above the HIGH mark.
5. Replace oil filler cap (A) and turn it clockwise until snug.
6. Check the oil level. Refer to Checking Engine Oil Level,
page 293 .
7. Close the hood. Refer to 5.4.2 Closing Hood (Lower
Position), page 267 .
Figure 5.66: Oil Filler Cap
Air Intake System
IMPORTANT:
Do NOT run engine with air cleaner disconnected or disassembled.
Engine intake air is drawn through a duct (A) from the
cooling box that precleans the air and then through a dual
element filter (B).
The air cleaner canister is equipped with an
aspirator (C) that removes dust continuously from the air
cleaner housing.
Figure 5.67: Air Intake System
169883
296
Revision A