Beacons (if installed) – MacDon M155 Operators Manual User Manual

Page 364

Text mode
Original mode

MAINTENANCE AND SERVICING

2. In the grill of the hood, remove two screws (A) from

light (B), and remove light.

3. Remove connector from light.

4. Connect wiring harness to new light (B) and install light

with screws (A).

Figure 5.169: Red Tail Lights

Beacons (if installed)

Warning beacons are available as an optional Dealer-installed attachment (MD #B5582).

1. Shut down engine and remove key. Turn beacons OFF.

NOTE:

Hold onto the handholds (B) on the cab front
corners, and stand on the header anti-slip strips,
or stand on the maintenance platform when
accessing the beacons (A).

Figure 5.170: Warning Beacons

2. Turn lens (A) counterclockwise to unlock lens from

base and remove lens.

Figure 5.171: Warning Beacons

169883

348

Revision A