MacDon M155 Operators Manual - Manual (Page 350)

MAINTENANCE AND SERVICING
1. The battery main disconnect switch (A) is located on
the right-hand frame rail beside the batteries. Ensure
battery switch (A) is switched to POWER OFF position.
2. Open the right cab-forward platform to expose the
batteries. Refer to 5.5.1 Opening Platforms (Standard
Position), page 269 .
3. Remove cable ties securing battery cables to
battery clamp.
Figure 5.136: Battery Switch
4. Position new batteries (G) on dual battery support.
NOTE: Ensure that batteries are positioned so that the
positive posts (C) face aft.
5. Install strap (F) with bolts (E).
6. Rotate bar (B) into position and secure with bolt (A).
7. Connect battery cables. Refer to Connecting Batteries,
page 335 .
8. Close the platform. Refer to 5.5.2 Closing Platforms
(Standard Position), page 270 .
Figure 5.137: Battery Location
169883
334
Revision A