MacDon M155 Operators Manual - Manual (Page 363)

MAINTENANCE AND SERVICING
Red and Amber Lights
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Shut down engine and remove key. Turn lights OFF.
NOTE: Hold onto the handholds (A) on the cab front
corners and stand on the header anti-slip strips,
or stand on the maintenance platform when
accessing the red and amber lights.
Figure 5.167: Cab Forward Handholds
2. Remove two screws (A) from lens and remove lens.
3. Push and twist light bulb to remove from socket.
4. Install new bulb in socket ensuring that bulb base is
properly engaged in socket. Use Bulb Trade #1157 for
red tail lights and #1156 for amber lights.
5. Reinstall lens with screws (B).
Figure 5.168: Red and Amber Lights
Red Tail Lights (if installed)
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Shut down engine and remove key. Turn lights OFF.
169883
347
Revision A