MacDon M155 Operators Manual - Manual (Page 331)

MAINTENANCE AND SERVICING
Adding Coolant
Check the coolant level in the coolant recovery tank (A) daily, the tank should be at least one-half full. If less,
add coolant.
NOTE: Do NOT add coolant to radiator except when
changing coolant.
To add coolant to the coolant recovery tank, follow
these steps:
1. Open the hood. Refer to 5.4.3 Opening Hood (Highest
Position), page 267 .
2. Open the platform. Refer to 5.5.1 Opening Platforms
(Standard Position), page 269 .
3. Remove cap (B) and add coolant until one-half full.
NOTE: For coolant specifications, refer to Lubricants,
Fluids, and System Capacities, page 263 .
4. Replace cap (B).
5. Close the platform. Refer to 5.5.2 Closing Platforms
(Standard Position), page 270 .
6. Close the hood. Refer to 5.4.4 Closing Hood (Highest
Position), page 268 .
Figure 5.104: Engine Cooling System
Maintaining Engine Cooling Box
Refer to the following procedures:
• Opening Cooler Box Screen, page 316
• Charge Air Cooling, page 316
• Cleaning Screens and Coolers, page 317
• Cleaning Cooler Box Components, page 318
• Adjusting Screen Cleaner Duct to Screen Clearance, page 320
• Closing Cooler Box Screen, page 321
169883
315
Revision A