2header functions, Header functions, 2 header functions – MacDon M155 Operators Manual User Manual
Page 89

3.18.2
Header Functions
Figure 3.62: Cab Display Module
A
– DISPLAY: Header functions.
B
– SELECT SWITCH: Allows Operator to select display item on lower line. Push to SELECT.
C
– FLOAT SWITCH – Header Right Side: Changes header float. The system remembers setting with deck shift
option if activated with float setting switch. Push + to Increase. Push – to Decrease.
D
– FLOAT SWITCH – Header Left Side: Changes header float. The system remembers setting with deck shift
option if activated with float setting switch. Push + to Increase. Push – to Decrease.
E
– AUGER/DRAPER SPEED ADJUST: Changes auger/draper speed INDEX with INDEX SWITCH ON. Changes
auger/draper SPEED with INDEX SWITCH OFF. Push upper switch to increase. Push lower switch to decrease.
F
– HEADER INDEX SWITCH: Links reel and conveyor speed to ground speed. Push-ON / Push-OFF.
NOTE:
Illuminates in ON position.
NOTE: Header must be engaged.
G
– RETURN TO CUT HEIGHT SWITCH: Allows cutting height preset. Push-ON/Push-OFF.
NOTE:
Illuminates in ON position.
NOTE: Header must be engaged.
169883
73
Revision A