Checking coolant level, Danger – MacDon M155 Operators Manual User Manual
Page 328
3. Remove the radiator cap (A).
IMPORTANT:
Turn the cap (A) counterclockwise to the first
notch to relieve pressure before removing cap
completely.
4. Check the coolant in the radiator using an antifreeze
tester.
Tester should indicate protection to
temperatures of -30°F (-34°C).
5. Inspect the radiator cap before reinstalling, refer to
Inspecting Radiator Cap, page 311
.
6. Replace radiator cap (A).
7. Close the platform. Refer to
8. Close the hood. Refer to
Figure 5.97: Engine Cooling System
Checking Coolant Level
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
Check coolant level in the coolant recovery tank daily.
1. Stop the engine and remove the key.
2. Open the hood. Refer to
5.4.3 Opening Hood (Highest Position), page 267
3. Open the platform. Refer to
5.5.1 Opening Platforms (Standard Position), page 269
NOTE:
To view coolant capacities, refer to
Lubricants, Fluids, and System Capacities, page 263
4. Close the platform. Refer to
5. Close the hood. Refer to
Figure 5.98: Engine Cooling System
169883
312
Revision A