MacDon M155 Operators Manual - Manual (Page 61)

OPERATOR’S STATION
3.5 Seat Belts
The windrower is equipped with a seat belt on the operator’s and trainer’s seats.
WARNING
• Before starting engine, securely fasten your seat belt and ensure trainer’s seat belt is fastened
if occupied.
• The seat belt can help ensure your safety if it is used and maintained.
• Never wear a seat belt loosely or with slack in the belt system. Never wear the belt in a twisted condition
or pinched between the seat structural members.
To fasten seat belt (A):
1. Pull belt at right side completely across your body.
2. Push the metal eye (B) into the buckle (C) until it locks.
3. Adjust the position of the belt as low on your body
as possible.
To release seat belt (A):
4. Push the red button (D) in the end of the buckle.
5. Separate the buckle (C) and metal eye (B).
Figure 3.14: Seat Belt
A - Seat Belt B - Metal Eye C - Buckle D - Red Button
169883
45
Revision A