MacDon M155 Operators Manual - Manual (Page 91)

OPERATOR’S STATION
Engine-Forward, Engine Running
Display Description
ROAD GEAR (Upper Line) Ground speed range switch in high range.
#####.# ENGINE HRS (Upper or Lower Line) Total engine operating time.
#####.# HEADER HRS (Upper or Lower Line) Total header operating time.
###### TOTAL ACRES (Upper or Lower Line)
###### TOTAL HECT (if Metric)
Total area cut by machine.
##.# HEADER HEIGHT (Upper or Lower Line) Distance setting (00.0–10.0) between cutterbar and ground.
##.# HEADER ANGLE (Upper or Lower Line) Angle setting (00.0–10.0) header relative to ground.
### °C or F HYD OIL TEMP Hydraulic oil temperature.
##.# VOLTS (Upper or Lower Line) Engine electrical system operating voltage.
SCROLL (Lower Line)
Displays above items after 2–3 seconds; press SELECT
to cancel.
Cab-Forward, Engine Running, Header Disengaged
Scroll through display with cab display module (CDM) switch or ground speed lever (GSL) switch.
Display (lower or upper line) Description
#####.# ENGINE HRS Total engine operating time.
#####.# HEADER HRS Total header operating time.
###.# SUB ACRES
###.# SUB HECTARES (if metric)
Area cut since last reset. To reset, display SUB ACRES
on lower line, and hold down Program switch until display
resets (5–7 seconds).
###### TOTAL ACRES
###### TOTAL HECT (if metric)
Total area cut by machine.
##.# HEADER HEIGHT Distance setting (00.0–10.0) between cutterbar and ground.
##.# HEADER ANGLE Angle setting (00.0–10.0) header relative to ground.
##.# L FLOAT R ##.# Float setting (0.0–10.0).
### °C or F HYD OIL TEMP Hydraulic oil temperature.
##.# VOLTS Engine electrical system operating voltage.
SCROLL (Lower Line)
Displays above items after 2–3 seconds; press SELECT
to cancel.
169883
75
Revision A