MacDon M155 Operators Manual - Manual (Page 171)

OPERATION
Double Windrow Attachment (DWA) Deck Position
The deck is raised and lowered with the DWA UP (A)
and DWA DOWN (B) switches on the ground speed
lever (GSL) or with the rocker switch on the operator’s
console, depending on how the windrower cab display
module (CDM) is programmed during the installation of
the double windrow attachment (DWA).
To swap controls from the console to the GSL, refer to
Detailed Programming Menu Flow Chart, page 88 .
NOTE: The same switch is used for raising and lowering
a swath roller (if installed).
Figure 4.93: Ground Speed Lever (GSL)
Figure 4.94: Operator’s Console
Double Windrow Attachment (DWA) Draper Speed
The draper speed is controlled with the rotary switch (A)
next to the rocker switch on the operator’s console.
Figure 4.95: Operator’s Console
169883
155
Revision A