Closing cooler box screen, Gearbox, Checking lubricant level and adding lubricant – MacDon M155 Operators Manual User Manual
Page 337: Closing cooler, Closing cooler box, Caution, Danger
Closing Cooler Box Screen
1. Unhook the support rod and store it in the screen door.
Close screen access door (B) and engage latch (A).
2. Close the hood. Refer to
.
Figure 5.116: Engine Cooling System
Gearbox
Checking Lubricant Level and Adding Lubricant
CAUTION
Park on a flat, level surface, header on the ground, and the ground speed lever in N-DETENT position and
steering wheel locked.
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Check the lubricant level every 50 hours as follows:
a. Park the windrower on level ground, shut down
engine, and remove key.
b. Under the windrower, beneath the main pumps,
locate and remove check plug (A). The lubricant
should be visible through the hole or slightly
running out.
NOTE:
To view lubricant specifications,
refer to
Lubricants, Fluids, and System Capacities, page
263
.
Figure 5.117: Gearbox Lubricant Check Plug
169883
321
Revision A