Setting knife speed “on the go, Caution, Operation setting knife speed “on the go – MacDon M155 Operators Manual User Manual

Page 253

Setting Knife Speed “On the Go”

Figure 4.289: Operator Console

A - Display

B - Slower

C - Faster

D - Program

E - Select

CAUTION

Check to be sure all bystanders have cleared the area.

Display and set knife speed “on the go” as follows:

1. Engage header.

2. On cab display module (CDM) press PROGRAM (D) and SELECT (E).

DISPLAY (A) shows #### KNIFE SPM.

#### = strokes per minute.

3. Press SLOWER (B) or FASTER (C) until desired knife speed is displayed at (A).

169883

237

Revision A