Lenze DDS v2.3 - Manual (Page 79)

Drive PLC Developer Studio
Working with projects and objects
6-1
l
DDS EN 2.3
6 Working with projects and objects
6.1 Managing projects
Those DDS commands that refer to the entire project are available in the main menu under File and
Project.
The menu Project also contains commands that refer to objects. A detailed description of these
commands is included in the chapter ”Working with objects”.
( ^ 6-24)
Note!
Write protection on *.bin file
For each changed or translate project, the corresponding *.bin will be overwritten. This file is saved
in the same directory as the project. If this file is write-protected, the project cannot be translated.
You have to remove the write protection.
6.1.1 Commands in the “File” menu
6.1.1.1 New
Icon: Menu: FileWNew Keyboard: -
Use this command to a create a blank project called ”Untitled”. Change the name when saving the
project.
6.1.1.2 New, with template
Icon: - Menu: FileWNew, with template Keyboard: -
Use this command to create a blank project named ”Untitled” including an optional template.
The template has the extension *.lpc and contains a fixed Lenze configuration.
The Lenze configuration includes:
•
Program POU
Organization units with technology function.
•
Required libraries
•
Global variables
•
Entries in the PLC configuration
•
Entries in the task configuration
•
Predefined user codes
•
Visualization and Receipt Manager (as required)
Open the dialog box Open and select a template file with the extension ”*.lpc”.
If the template is protected by Passwords or defined with User groups, the system will prompt for
a password.
Show/Hide Bookmarks