Lenze DDS v2.3 - Manual (Page 311)

Drive PLC Developer Studio
Appendix
15-1
l
DDS EN 2.3
15 Appendix
15.1 Command line commands
The DDS can be assigned certain commands on startup that will become effective on program
execution. These command line commands start with ” /” and are case-insensitive. Processing is
sequential from left to right.
/online DDS attempts to go online with the current project after startup.
/run DDS starts the user program after log-in.
Valid in combination with /online only.
/show
/show hide
/show icon
/show max
/show normal
The DDS frame window display can be set.
The window is not displayed and does not show in the task bar.
The window is minimized.
The window is maximized.
The window is shown in the status applicable on last exit.
/out All messages are output into the message window and the file .
/cmd After startup, the commands in command file will be executed.
A command line input is structured as follows:
” ” ” ” / / ...
DDS file *.pro is opened, the window is not displayed. The content of command file (cmdfile)
command.cmd is processed.
Show/Hide Bookmarks