INFICON XTC/3 Thin Film Deposition Controller Operating Manual - Manual (Page 27)

1 - 11
PN
07
4-
44
6-
P1
J
XTC/3 Operating Manual
1.4.10 Operating Environment
Usage . . . . . . . . . . . . . . . . . . . . . . . . Indoor only
Temperature . . . . . . . . . . . . . . . . . . . 0 to 50°C (32-122°F)
Humidity . . . . . . . . . . . . . . . . . . . . . . Up to 80% RH. @ 31°C, non-condensing
Altitude . . . . . . . . . . . . . . . . . . . . . . . Up to 2000 m
Installation (Overvoltage) . . . . . . . . . Category II
Measurement Category . . . . . . . . . . II
Pollution Degree. . . . . . . . . . . . . . . . 2
1.4.11 Storage Temperature
Storage Temperature . . . . . . . . . . . . -10 to 70°C (14 to 158°F)
1.4.12 Warm Up Period
Warm Up Period . . . . . . . . . . . . . . . . None required;
For maximum stability allow five minutes.
1.4.13 Size
H x W x L (not including mounts or user connectors)
89 x 203 x 305 mm (3.5 x 8 x 12 in.)
1.4.14 Connector Clearance Requirements
Front . . . . . . . . . . . . . . . . . . . . . . . . . Less than 26 mm (1.0 in.)
Rear . . . . . . . . . . . . . . . . . . . . . . . . . Less than 102 mm (4.0 in.)
1.4.15 Weight
With all options . . . . . . . . . . . . . . . . . 2.7 kg (6 lb.)
1.4.16 Cleaning
Use a mild, nonabrasive cleaner or detergent taking care to prevent cleaner from
entering the unit.