2 standard update film name (xtc/3m only) – INFICON XTC/3 Thin Film Deposition Controller Operating Manual User Manual

Page 132

5 - 20

XTC/3 Operating Manual

All General parameters (4 bytes per parameter)

All parameters for each film (4 bytes per parameter) (9 or 32 films based on
XTC/3S or XTC/3M)

All input definitions (9) (1 byte per input) (XTC/3M only)

All output definitions (20) (1 byte per output) (XTC/3M only)

All output types (20) (1 byte per output) (XTC/3M only)

All Film Names (null terminated) (32 films based on XTC/3M only)

List of parameters for Command ID 3 = (XTC/3M only)

…Name>…

Number of Bytes in Response (2 bytes)

Every process layer list for each process 1 through 50 (2 byte length (for the
number of layers programmed) followed by 1 byte for each programmed layer)

All process Names (null terminated) (1 - 50)

List of parameters for Command ID 4 = (XTC/3M only)

…Name>…

Number of Bytes in Response (2 bytes)

Every process layer list for each process 51 through 99 (2 byte length (for the
number of layers programmed) followed by 1 byte for each programmed layer)

All process Names (null terminated) (51 - 99)

5.2.2.4.2 Standard Update Film Name (XTC/3M only)

Command:

Film Number = 1-32

= string, (maximum 15 characters, characters are restricted to hex
values 20 to 7E inclusive, plus terminating null character)

Response:

None (Just header and trailer)